深圳市科辉德电子科技有限公司

6187 1/4” Shaft, 3/8” Bushing

ELECTRICAL
1
1
Specifications subject to change without notice.
2
Linearity is measured between 1% and 99% of input voltage.
3
Special TCR available to ±100 ppm/°C.
4
Measured with 10 VDC CW to CCW and slider at 50% of electrical travel
Resistance Range 1K to 100K Ohms
Standard Resistance Tolerance ±10%
Minimum Practical Resistance Tolerance ±5%
Independent Linearity
2
±1%
Minimum Practical Independent Linearity ±0.5%
Input Voltage 400 VDC maximum, not to exceed power rating
Power Rating 1.0 Watt at 70°C, derating to 0 at 125°C
Dielectric Strength 750 V rms
Insulation Resistance 1,000 Megohms minimum
Output smoothness 0.1% maximum
Actual Electrical Travel 340° nominal (300° with stop feature)
Electrical Continuity Travel 350° nominal (320° with stop feature)
End Voltage maximum 0.5% of input voltage
Resolution essentially infinite
Temperature Coefficient of Resistance
3
-400 ppm/°C typical
Temperature Coefficient of Output Voltage
4
±10 ppm/°C typical

MECHANICAL

Total Mechanical Travel 360° Continuous (320° ±3° with stop feature)
Number of Gangs 1 maximum
Weight 0.53 oz. nominal (single gang)
Backlash 1° maximum
Static Stop Strength 40 oz.-in.
Panel Nut Tightening Torque 25 lb.-in. maximum
Start/Run Torque 1.0 oz.-in.

)
ENVIRONMENTAL(MIL-PRF-39023)

Operating Temperature Range -40°C to 125°C dynamic, -65°C to 125°C static
Temperature Cycling 5 cycles, -65°C to 125°C, maximum 10% ΔR
Shock 6 ms Saw-tooth, 100 G’s, 0.1 ms maximum discontinuity
Vibration 10 G’s, 10 to 500 Hz, maximum 2% ΔR, 0.1 ms maximum discontinuity
Moisture Resistance five 24 hour cycles, maximum 25% ΔR
High Temperature Exposure 1,000 hours at 125°C, maximum 0.5% ΔVR
Rotational Life 5 million shaft revolutions
Rotational Load Life 5 million shaft revolutions, maximum 10% ΔR
Ingress Protection Rating (IP Code) IP50, IP66 available as option (feature code ES)